Hey all,
Just installed a turbo onto my 2L hilux, and im having trouble turning the fuel screw in.
I cracked the locknut and tried to screw the adjuster in but it looks like there is a sleeve crimped onto the thread to stop it moving. Is this the case, or am i doing it wrong?
Cheers

http://i218.photobucket.com/albums/cc302/yamaha__308/DSC09902Medium.jpg
=============
Mate, that looks like the same screw as mine. The diesel guy (that rebuilt my pump), screwed mine in/out (can't remember which way) 1/4 turn to suit my turbo install and I don't recall any sleeve like you have??? but mine did have a (factory) wired up seal. I'd take it to a diesel shop and ask their opinion. I'm sure they would only charge a few dollars to adjust it for you (5 minutes and a simple turn with the right spanner).
=============
yer mate that is the fuel screw in is more out is less
=============
Thanks guys, worked it out. Was just being too gentle..
Turned it in 1/3 of a turn which gave EGT of 300 C max post turbo.

Time to turn it up again!
=============
this might be a stupid queston but are you refuring to the one that has 'Out' on the head of it?
=============
this might be a stupid queston but are you refuring to the one that has 'Out' on the head of it?

No thats the fuel line. The adjustment bolt with the red niko mark on it is the fuel adjustment.
=============
i didnt think it was that big one.
=============
vBulletin v3.6.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.0.0 (Unregistered)