Got the tailshaft off no worries, the nut in the centre that has the pinch in it, how do you get the f*cker off?
=============
Rattle gun or lock the shaft up somehow and a big bar on it can use a centre pop to dig the tab out of the groove normaly just undoing it works
=============
3/4 rattle gun lol or just your half inch gun will do fine.
=============
Yer got it off. my rattle gun is a pos doesnt undo nething. the shaft is seized in there. one problem after another.
=============
Take it to local mechanic with a 6 pack :D
=============
pfft angle grinder will fix it. got someone coming to look at it on saturday so need it done.
=============
Some of that freeze and release stuff might be helpfull soft hammer(brass hamer) or brass drift lock flange in vice and give it a belt or get it pressed off. use anti seize when you put it back together
=============
vBulletin v3.6.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.0.0 (Unregistered)