¡¡

 | Home | CarCare | Game | Life | Business | 


wiring emanage ultimate harness
¡¡¡¡¡¡IN FOCUS main

¡¤AVCS not showing on stock ¡­
¡¤347whp H6
¡¤Check engine and cruise co¡­
¡¤Open ECU or AP
¡¤INQUIRIES NEEDED. which tu¡­
¡¤need tuning???
¡¤How to Get an Accurate Bas¡­
¡¤bad A/F Sensor?
¡¤Front mount intercooler qu¡­
¡¤Emanage Ultimate - New Kno¡­
¡¤The MMS ethanol additive t¡­
¡¤Wireless?
¡¤Road Race Tune or Drag Rac¡­
¡¤Wastegate Duty Cycle?
¡¤UTEC and OpenECU?
¡¤Possible to datalog a 2007¡­
¡¤07 2.5i ECU Pinout
¡¤Please evaluate my log, fi¡­
¡¤em choice
¡¤What is learned ignition t¡­
¡¤My first logs second attem¡­
¡¤Can you use a WB02 in plac¡­
¡¤Exhaust / high flow cat qu¡­
¡¤Car computer question
¡¤LC-1 Install Write Ups?
wiring emanage ultimate harness

Position: Home >> CarCare >> Engine >> Text ¡¡
mecp 12v installer...but I've never wired an ECU before... do I basicly just "vampire" tap into the stock wires?(yes I'm going to solder) are there any harness adapters I can buy so I don't have to butcher my stock wiring?

any links to anywhere that has a decent write-up? thanks ! any info would be awesome !:)
=============
No harness adapters that I know of, you are pretty much going to have to butcher your stock wiring. The E-manage doesn't just vampire tap onto wires, you actually cut them and use some connectors to run the wires through the e-manage but making sure that if you were to disconnect the e-manage you could hook the wires back together easily with the connectors they provide.

Pretty much I am saying read the manual very carefully several times and also make sure you know which wires you are cutting or tapping onto. I would spend a day and take my time to do it right so you don't have to redo it later.
=============
O goody.....looks like I am definatly going to invest in a harness though. I refuse to cut my stocker. Even though I will have this car till the day I die...do you know how long it takes to replace an entire harness!???

does anyone have that link to the place that sells the plug adapters for our Harness's?
=============
I have a wiring diagram spreadsheet for wiring it into my 99 Legacy GT. It may be a little different then your Impreza.

Speaking of instruction manual, mine came in only Japanese with a little English here and there. Is yours in English?
=============
I just ordered the Harness....I'm still waiting to order the ultimate untill after I get my engine back in.
=============
I just ordered the Harness.....

OMG your spending alot of money to do this wrong

10k of engine deserves more than 19.95 of ecu piggy back
=============
^ ok then...help a brother out then...find me a better way to pass mass state inspection while running a hydra, link or other EM that is sapposedly "better" ?
=============
depends on which heads your running
205 heads - 02 wrx harness +ecu
255/7 04 sti ecu/harness
207 heads 01+jdm ecu/harness
=============
98 Dohc


I'm beggining to think that I would be better off puting my 98 back to stock...and buying a OBD1 Impreza would be better :(
=============
www.boomslang.com can custom make you a plug and play harness it is well worth it I did the wiring myself and there is alot of wires the most I ever seen in a wiring harness. Oh by the way you are gonna love the ultimate I hated it at first until I understood it more big improvement from blue
=============
  • Previous PostsArticle :

  • Next PostsArticle :


  • Example Unordered List

    AVCS not showing on stock ¡­
    INQUIRIES NEEDED. which tu¡­
    How to Get an Accurate Bas¡­
    The MMS ethanol additive t¡­
    Wireless?
    Please evaluate my log, fi¡­
    My first logs second attem¡­
    LC-1 Install Write Ups?
    EMS sensors & Wiring?
    ECUExplorer (Tari Software¡­


    Top A browser built for speed, stability and security
    | repair slow computer | Link | Copyright |